[lime-dev] Community profiles

Anthony Garcia androidclone at gmail.com
Thu Nov 2 23:45:20 UTC 2017


Indeed I am using the develop branch as I am compiling firmware for newer
hardware that is not available on master.

Archer-c59-v1

On Nov 3, 2017 1:33 AM, "Nicolas Pace" <nico at libre.ws> wrote:

> Second report regarding this,
> One important thing is to know if you are using the master branch or
> the develop branch (this also applies to bruno question on the other
> thread).
>
> The branch that needs to be used it the master branch, unless you are
> developing the firmware.
>
> If this is the case, then we might be talking about an issue!
>
> Regards,
>
> On Thu, 2017-11-02 at 22:37 +0200, Anthony Garcia wrote:
> > HI Nicolas,
> >
> > Thank you for your quick response and continued support! I have
> > reinstalled my sdk to rule out user error. When I try to load
> > libremesh/encrypt-11s community profile as a test, Cooker sees the --
> > community=libremesh/encrypt-11s switch but does not cook lime-
> > defaults in the etc/config folder. I have unpacked my squashfs-root
> > in the output to verify that the changes were not made. Strangely
> > enough the wpad-mesh specified from the PACKAGES file is added but
> > anything else in my root/etc/config folder is ignored. I am using the
> > develop branch on a fresh install using the wireless-compat fix. Here
> > is my pastebin log https://pastebin.com/bmxqtbbz
> >
> > I forgot to connect to the internet during the compile but all of the
> > files were already updated/downloaded. I do not see any errors during
> > compile. I have tried several other profiles with the same result.
> > PACKAGES hook will compile.
> >
> > Regards,
> >
> > -Tony
> >
> > On Thu, Nov 2, 2017 at 9:51 PM, Nicolas Pace <nico at libre.ws> wrote:
> > > On Wed, 2017-11-01 at 16:46 +0200, Anthony Garcia wrote:
> > > > Hello Libremesh team, first and foremost thank you for your hard
> > > work
> > > > and effort that has gone into creating this platform.
> > >
> > > Yes, a big kudos for every one of us for the community project we
> > > are
> > > doing! :)
> > >
> > > > I have a question regarding the creation of local network
> > > profiles.
> > > > Based on the directory structure for the community profiles
> > > > established. In order to customize the firmware are we supposed
> > > to
> > > > place the lime-default file in  lime-
> > > > sdk/communities/communityname/profilename/etc/config/
> > >
> > > Exactly!
> > >
> > > > When I specify my own custom profile, the cooked firmware is not
> > > > customized using the "--community=name/profile"" switch. I can
> > > > successfully cook the pre-existing network-profiles that were
> > > > downloaded from the git. Is there any additional documentation
> > > > regarding this function that I may have missed for local
> > > development?
> > > >
> > >
> > > No. It should work.
> > >
> > > Can you post the output of the command as well as the call to the
> > > cooker command?
> > >
> > > Regards,
> > >
> > > _______________________________________________
> > > lime-dev mailing list
> > > lime-dev at lists.libremesh.org
> > > https://lists.libremesh.org/mailman/listinfo/lime-dev
> >
> > _______________________________________________
> > lime-dev mailing list
> > lime-dev at lists.libremesh.org
> > https://lists.libremesh.org/mailman/listinfo/lime-dev
> _______________________________________________
> lime-dev mailing list
> lime-dev at lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.libremesh.org/pipermail/lime-dev/attachments/20171103/9c8e3043/attachment.html>


More information about the lime-dev mailing list