[lime-users] 802.11s config

Ruairi Hickey ruairi.hickey-lime at collon.ie
Wed May 3 16:07:25 UTC 2017


On Tuesday 2 May 2017 23:15:40 IST Ruairi Hickey wrote:
> ----------  Forwarded Message  ----------
> 
> Subject: Re: [lime-users] 802.11s config
> Date: Tuesday 2 May 2017, 21:48:57 IST
> From: Ruairi Hickey <ruairi.hickey-mesh at collon.ie>
> To: lime-users at lists.libremesh.org
> 
> On Wednesday 26 April 2017 12:47:04 IST you wrote:
> > I'll try to setup a testbed for testing 802.11s at my place and let you
> > know the results.
> > 
> > In any case, it would be better if you can use the last pre-release for
> > libremesh: http://repo.libremesh.org/lime-17.04
> > 
> > Cheers.
> > 
> > On 20/04/17 20:04, Ruairi Hickey wrote:
> > > On Thursday 20 April 2017 11:34:09 IST you wrote:
> > >> On 19/04/17 20:46, Ruairi Hickey wrote:
> > >>> On Wednesday 19 April 2017 19:29:59 IST Ilario Gelmetti wrote:
> > >>>> On 04/19/2017 05:25 PM, Ruairi Hickey wrote:
> > >>>>> While the mesh appears to be up and the stations can see each other
> > >>>>> there is no ip connectivity - if a client is connected to the
> > >>>>> libremesh.org
> > >>>>> via AP node d9:18:6e it can not connect to the internet / outside
> > >>>>> via
> > >>>>> AP
> > >>>>> d9:44:80.
> > >>>> 
> > >>>> Hi Ruairi!
> > >>>> Have you plugged an internet connection to a WAN port of your router?
> > >>>> If your router doesn't have a WAN port you will have to configure
> > >>>> another one as WAN (check out /etc/config/lime-example and
> > >>>> http://libremesh.org/docs/changing_network_behavior.html ).
> > >>>> If this doesn't work: can you post the content of /etc/config/network
> > >>>> on
> > >>>> your LibreMesh router?
> > >>>> And the output of the "ip address show" commend.
> > >>>> 
> > >>>>> Are there additional steps required to enable this (it works
> > >>>>> out of the box on ad- hoc) ?
> > >>>> 
> > >>>> No, it should automagically work when you plug the WAN port of the
> > >>>> LiMe
> > >>>> router into a LAN port of a router offering a DHCP server and a
> > >>>> gateway
> > >>>> to the internet.
> > >>>> Let us know!
> > >>>> Ilario
> > >>> 
> > >>> Hi Ilario,
> > >>> 
> > >>>      The WAN port is connected to the switch and if that is the only
> > >>>      router in
> > >>> 
> > >>> up / or if I connect to that when connecting to SSID libremesh.org I
> > >>> can
> > >>> connect to the internet.
> > >>> 
> > >>>     If I connect to either of the other 2 nodes I cannot connect to
> > >>>     the
> > >>> 
> > >>> Internet...
> > >> 
> > >> The link layer seems to work fine in your setup, so the problem is
> > >> proably in the mac or ip layer. Please, run the next test and attach
> > >> the
> > >> output:
> > >> 
> > >> Run "bmx6 -c originators" to see all nodes in the network.
> > >> 
> > >> Run "bmx6 -c links" to see the one-hop nodes
> > >> 
> > >> Run "batctl o" to see the layer2 nodes
> > >> 
> > >> Run "bmx6 -cp" on the node with Internet connection to see if the tunIn
> > >> for sharing Internet is enabled (inet4).
> > >> 
> > >> Cheers.
> > >> 
> > >>> I've attached 2 text files (one for each router with the file
> > >>> contents)
> > >>> router connected to switch (WAN port) / Internet
> > >>> router-d94040.txt
> > >>> 
> > >>> router in mesh
> > >>> router-d94480.txt
> > >>> 
> > >>> Thanks,
> > >>> 
> > >>>          Ruairi
> > >>> 
> > >>> (if the attachments get stripped I'll resend with the contents
> > >>> inline..)
> > >>> 
> > >>> 
> > >>> 
> > >>> _______________________________________________
> > >>> lime-users mailing list
> > >>> lime-users at lists.libremesh.org
> > >>> https://lists.libremesh.org/mailman/listinfo/lime-users
> > > 
> > > Hi,
> > > 
> > >     If it would be of assistance I can give you ssh access to the router
> > >     ... I
> > > 
> > > have it behind a static IP, just need to open up the firewall.
> > > 
> > > Ruairi
> 
> Hi,
>     Apologies, I missed one of your emails last week ... thought it was a
> duplicate send....I will run the bmx6 commands etc when the I manage to
> resolve the issue below....
> 
> I have installed the image from 26.04 on the routers last night but there is
> an error bringing up the wlan0-mesh interface
> 
> Thu Apr 27 13:54:26 2017 kern.info kernel: [   20.659483] IPv6:
> ADDRCONF(NETDEV_UP): wlan0-mesh: link is not ready
> Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command failed:
> Resource busy (-16)
> Thu Apr 27 13:54:26 2017 daemon.notice netifd: radio0 (913): command failed:
> Link has been severed (-67)
> 
> 
> Thanks,
>        Ruairi
> 
> 
> 
> 
> 
> -----------------------------------------
> _______________________________________________
> lime-users mailing list
> lime-users at lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users

Hi,
    Do I need the wpad-mesh pkg installed - Does wpad-mini support 80211s ?

Thanks  
        Ruairi


More information about the lime-users mailing list