[lime-users] Cooking 11s for ZBT-APE522II

Juergen Kimmel juergenkimmel at gmail.com
Wed May 24 01:43:14 UTC 2017


Here come the data:
login as: root
root at 10.13.0.1's password:


BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|
lede-project.org
 \        \   DE /
  \    LE  \    /
 -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.1, r3316-7eb58cf109)
    \________\/
 -----------------------------------------------------------

  ___   __ __                _______             __
 |   |_|__|  |--.----.-----.|   |   |-----.-----|  |--.
 |     |  |  _  |   _|  -__||       |  -__|__ --|     |
 |_____|__|_____|__| |_____||__|_|__|_____|_____|__|__|

 ------------------------------------------------------
 LiMe 0.0 development (develop rev.6ded289 20170522_1204)
 ------------------------------------------------------
 http://libremesh.org
 ------------------------------------------------------

=== System Notes =====================================
======================================================

root at LiMe-16d9e8:~# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
3: ip6tnl0 at NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group
default qlen 1
    link/tunnel6 :: brd ::
4: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bat0
state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether aa:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
8: eth0.1 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
9: anygw at br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UNKNOWN mode DEFAULT group default qlen 1
    link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff
10: eth0-1_13 at eth0.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
11: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
12: eth0-2_13 at eth0.2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
13: eth0-2_29 at eth0.2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue master bat0 state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
14: eth0_13 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
15: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
br-lan state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 16:f1:88:98:5f:0b brd ff:ff:ff:ff:ff:ff
16: bmxmain at NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1452 qdisc noqueue
state UNKNOWN mode DEFAULT group default qlen 1
    link/tunnel6 fd66:66:66:a:7aa3:51ff:fe16:d9e8 peer
fd66:66:66:ff00:7aa3:51ff:fe16:d9e8
17: wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc mq state
UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
18: wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1536 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
19: wlan1-ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
br-lan state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
20: wlan0-ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
    link/ether 7a:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
21: wlan0-apname: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br-lan state UP mode DEFAULT group default qlen 1000
    link/ether 7e:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
22: wlan1-apname: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
master br-lan state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:ea brd ff:ff:ff:ff:ff:ff
23: wlan1-mesh_13 at wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
24: wlan1-mesh_29 at wlan1-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e8 brd ff:ff:ff:ff:ff:ff
25: wlan0-mesh_13 at wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1398
qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
26: wlan0-mesh_29 at wlan0-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532
qdisc noqueue master bat0 state UP mode DEFAULT group default qlen 1000
    link/ether 78:a3:51:16:d9:e9 brd ff:ff:ff:ff:ff:ff
27: bmxC4main: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
fq_codel state UNKNOWN mode DEFAULT group default qlen 500
    link/none
28: bmxC6main: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
fq_codel state UNKNOWN mode DEFAULT group default qlen 500
    link/none
root at LiMe-16d9e8:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.lan=interface
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ip6assign='60'
network.lan.ip6addr='2a00:1508:a0d:fe00::16:d9e8/64'
network.lan.ipaddr='10.13.217.232'
network.lan.netmask='255.255.0.0'
network.lan.mtu='1500'
network.lan.ifname='bat0' 'eth0.1'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='78:a3:51:16:d9:e8'
network.wan=interface
network.wan.ifname='eth0.2'
network.wan.proto='dhcp'
network.wan_dev=device
network.wan_dev.name='eth0.2'
network.wan_dev.macaddr='78:a3:51:16:d9:e9'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='none'
network. at switch[0]=switch
network. at switch[0].name='switch0'
network. at switch[0].reset='1'
network. at switch[0].enable_vlan='1'
network. at switch_vlan[0]=switch_vlan
network. at switch_vlan[0].device='switch0'
network. at switch_vlan[0].vlan='1'
network. at switch_vlan[0].ports='0 1 2 3 6t'
network. at switch_vlan[1]=switch_vlan
network. at switch_vlan[1].device='switch0'
network. at switch_vlan[1].vlan='2'
network. at switch_vlan[1].ports='4 6t'
network.lm_net_br_lan_anygw_dev=device
network.lm_net_br_lan_anygw_dev.type='macvlan'
network.lm_net_br_lan_anygw_dev.name='anygw'
network.lm_net_br_lan_anygw_dev.ifname='br-lan'
network.lm_net_br_lan_anygw_dev.macaddr='aa:aa:aa:0d:fe:aa'
network.lm_net_br_lan_anygw_if=interface
network.lm_net_br_lan_anygw_if.ifname='anygw'
network.lm_net_br_lan_anygw_if.auto='1'
network.lm_net_br_lan_anygw_if.netmask='255.255.0.0'
network.lm_net_br_lan_anygw_if.proto='static'
network.lm_net_br_lan_anygw_if.ipaddr='10.13.0.1'
network.lm_net_br_lan_anygw_if.ip6addr='2a00:1508:a0d:fe00::1/64'
network.lm_net_anygw_rule6=rule6
network.lm_net_anygw_rule6.src='2a00:1508:a0d:fe00::1/128'
network.lm_net_anygw_rule6.lookup='170'
network.lm_net_anygw_route6=route6
network.lm_net_anygw_route6.interface='lm_net_br_lan_anygw_if'
network.lm_net_anygw_route6.target='2a00:1508:a0d:fe00::/64'
network.lm_net_anygw_route6.table='170'
network.lm_net_anygw_rule4=rule
network.lm_net_anygw_rule4.src='10.13.0.1/32'
network.lm_net_anygw_rule4.lookup='170'
network.lm_net_anygw_route4=route
network.lm_net_anygw_route4.interface='lm_net_br_lan_anygw_if'
network.lm_net_anygw_route4.target='10.13.0.0'
network.lm_net_anygw_route4.netmask='255.255.0.0'
network.lm_net_anygw_route4.table='170'
network.lm_net_batadv_dummy_if=interface
network.lm_net_batadv_dummy_if.ifname='dummy0'
network.lm_net_batadv_dummy_if.macaddr='aa:a3:51:16:d9:e8'
network.lm_net_batadv_dummy_if.proto='batadv'
network.lm_net_batadv_dummy_if.mesh='bat0'
network.lm_net_eth0_1_bmx6_dev=device
network.lm_net_eth0_1_bmx6_dev.type='8021ad'
network.lm_net_eth0_1_bmx6_dev.name='eth0-1_13'
network.lm_net_eth0_1_bmx6_dev.ifname='eth0.1'
network.lm_net_eth0_1_bmx6_dev.vid='13'
network.lm_net_eth0_1_bmx6_dev.mtu='1398'
network.lm_net_eth0_1_bmx6_if=interface
network.lm_net_eth0_1_bmx6_if.proto='none'
network.lm_net_eth0_1_bmx6_if.auto='1'
network.lm_net_eth0_1_bmx6_if.ifname='eth0-1_13'
network.lm_net_wlan0_mesh_batadv_dev=device
network.lm_net_wlan0_mesh_batadv_dev.type='8021ad'
network.lm_net_wlan0_mesh_batadv_dev.name='wlan0-mesh_29'
network.lm_net_wlan0_mesh_batadv_dev.ifname='@lm_net_wlan0_mesh'
network.lm_net_wlan0_mesh_batadv_dev.vid='29'
network.lm_net_wlan0_mesh_batadv_dev.mtu='1532'
network.lm_net_wlan0_mesh_batadv_if=interface
network.lm_net_wlan0_mesh_batadv_if.auto='1'
network.lm_net_wlan0_mesh_batadv_if.ifname='wlan0-mesh_29'
network.lm_net_wlan0_mesh_batadv_if.proto='batadv'
network.lm_net_wlan0_mesh_batadv_if.mesh='bat0'
network.lm_net_wlan0_mesh_bmx6_dev=device
network.lm_net_wlan0_mesh_bmx6_dev.type='8021ad'
network.lm_net_wlan0_mesh_bmx6_dev.name='wlan0-mesh_13'
network.lm_net_wlan0_mesh_bmx6_dev.ifname='@lm_net_wlan0_mesh'
network.lm_net_wlan0_mesh_bmx6_dev.vid='13'
network.lm_net_wlan0_mesh_bmx6_dev.mtu='1398'
network.lm_net_wlan0_mesh_bmx6_if=interface
network.lm_net_wlan0_mesh_bmx6_if.auto='1'
network.lm_net_wlan0_mesh_bmx6_if.ifname='wlan0-mesh_13'
network.lm_net_wlan0_mesh_bmx6_if.proto='static'
network.lm_net_wlan0_mesh_bmx6_if.ipaddr='169.254.217.233'
network.lm_net_wlan0_mesh_bmx6_if.netmask='255.255.255.255'
network.lm_net_wlan0_mesh=interface
network.lm_net_wlan0_mesh.proto='none'
network.lm_net_wlan0_mesh.mtu='1536'
network.lm_net_wlan0_mesh.auto='1'
network.lm_net_wlan1_mesh_batadv_dev=device
network.lm_net_wlan1_mesh_batadv_dev.type='8021ad'
network.lm_net_wlan1_mesh_batadv_dev.name='wlan1-mesh_29'
network.lm_net_wlan1_mesh_batadv_dev.ifname='@lm_net_wlan1_mesh'
network.lm_net_wlan1_mesh_batadv_dev.vid='29'
network.lm_net_wlan1_mesh_batadv_dev.mtu='1532'
network.lm_net_wlan1_mesh_batadv_if=interface
network.lm_net_wlan1_mesh_batadv_if.auto='1'
network.lm_net_wlan1_mesh_batadv_if.ifname='wlan1-mesh_29'
network.lm_net_wlan1_mesh_batadv_if.proto='batadv'
network.lm_net_wlan1_mesh_batadv_if.mesh='bat0'
network.lm_net_wlan1_mesh_bmx6_dev=device
network.lm_net_wlan1_mesh_bmx6_dev.type='8021ad'
network.lm_net_wlan1_mesh_bmx6_dev.name='wlan1-mesh_13'
network.lm_net_wlan1_mesh_bmx6_dev.ifname='@lm_net_wlan1_mesh'
network.lm_net_wlan1_mesh_bmx6_dev.vid='13'
network.lm_net_wlan1_mesh_bmx6_dev.mtu='1398'
network.lm_net_wlan1_mesh_bmx6_if=interface
network.lm_net_wlan1_mesh_bmx6_if.auto='1'
network.lm_net_wlan1_mesh_bmx6_if.ifname='wlan1-mesh_13'
network.lm_net_wlan1_mesh_bmx6_if.proto='static'
network.lm_net_wlan1_mesh_bmx6_if.ipaddr='169.254.217.232'
network.lm_net_wlan1_mesh_bmx6_if.netmask='255.255.255.255'
network.lm_net_wlan1_mesh=interface
network.lm_net_wlan1_mesh.proto='none'
network.lm_net_wlan1_mesh.mtu='1536'
network.lm_net_wlan1_mesh.auto='1'
network.lm_net_eth0_bmx6_dev=device
network.lm_net_eth0_bmx6_dev.type='8021ad'
network.lm_net_eth0_bmx6_dev.name='eth0_13'
network.lm_net_eth0_bmx6_dev.ifname='eth0'
network.lm_net_eth0_bmx6_dev.vid='13'
network.lm_net_eth0_bmx6_dev.mtu='1398'
network.lm_net_eth0_bmx6_if=interface
network.lm_net_eth0_bmx6_if.proto='none'
network.lm_net_eth0_bmx6_if.auto='1'
network.lm_net_eth0_bmx6_if.ifname='eth0_13'
network.lm_net_eth0_2_batadv_dev=device
network.lm_net_eth0_2_batadv_dev.type='8021ad'
network.lm_net_eth0_2_batadv_dev.name='eth0-2_29'
network.lm_net_eth0_2_batadv_dev.ifname='eth0.2'
network.lm_net_eth0_2_batadv_dev.vid='29'
network.lm_net_eth0_2_batadv_dev.mtu='1532'
network.lm_net_eth0_2_batadv_if=interface
network.lm_net_eth0_2_batadv_if.auto='1'
network.lm_net_eth0_2_batadv_if.ifname='eth0-2_29'
network.lm_net_eth0_2_batadv_if.proto='batadv'
network.lm_net_eth0_2_batadv_if.mesh='bat0'
network.lm_net_eth0_2_bmx6_dev=device
network.lm_net_eth0_2_bmx6_dev.type='8021ad'
network.lm_net_eth0_2_bmx6_dev.name='eth0-2_13'
network.lm_net_eth0_2_bmx6_dev.ifname='eth0.2'
network.lm_net_eth0_2_bmx6_dev.vid='13'
network.lm_net_eth0_2_bmx6_dev.mtu='1398'
network.lm_net_eth0_2_bmx6_if=interface
network.lm_net_eth0_2_bmx6_if.proto='none'
network.lm_net_eth0_2_bmx6_if.auto='1'
network.lm_net_eth0_2_bmx6_if.ifname='eth0-2_13'
root at LiMe-16d9e8:~# uci show lime
lime.system=lime
lime.network=lime
lime.wifi=lime
lime.lm_hwd_openwrt_wan=net
lime.lm_hwd_openwrt_wan.autogenerated='true'
lime.lm_hwd_openwrt_wan.protocols='anygw' 'batadv:%N1' 'bmx6:13' 'olsr:14'
'olsr6:15' 'olsr2:16' 'ieee80211s' 'wan'
lime.lm_hwd_openwrt_wan.linux_name='eth0.2'
root at LiMe-16d9e8:~#


Pau <pau at dabax.net> schrieb am Di., 23. Mai 2017 um 13:17 Uhr:

>
> On 23/05/17 04:24, Juergen Kimmel wrote:
> > Maybe this clarifies:
> > [   23.650087] batman_adv: bat0: Changing gw mode from: off to: client
> > [   23.703459] batman_adv: bat0: multicast_mode: Changing from: enabled
> to:
> > disabled
> > [   23.742264] batman_adv: The newly added mac address
> (78:a3:51:16:d9:e9)
> > already exists on: eth0-2_29
> > [   23.751672] batman_adv: It is strongly recommended to keep mac
> addresses
> > unique to avoid problems!
>
> That should not be a real problem, just annoying.
>
> > Juergen Kimmel <juergenkimmel at gmail.com> schrieb am Mo., 22. Mai 2017 um
> > 20:25 Uhr:
> >
> >> Hi all,
> >> flashed the precompiled binary.
> >>
> >> Interface WAN does not come up WAN6 does. So I can't test stability in
> >> concern of internet traffic.
>
> Does the system recognizes the eth1 device? (ip link show)
>
> Can you paste the output of "uci show network" and "uci show lime" ?
>
> Thanks.
>
> >> Minor flaw: Meshpoint SSID isn't set as usual.
> >> About every 10 sec dmesg:  br-lan: received packet on bat0 with own
> >> address as source address
> >> Devices mesh as expected.
> >>
> >> Cheers
> >>
> >> Pau <pau at dabax.net> schrieb am Mo., 22. Mai 2017 um 11:15 Uhr:
> >>
> >>>
> >>>
> >>> On 21/05/17 23:30, Juergen Kimmel wrote:
> >>>> Hi Ilario you got me. Has been a typo - minus instead of underscore -.
> >>>> So this time output ok.
> >>>> But also this firmware ends in a bootloop triggered by traffic.
> >>>> Still waiting for daniel golle's efforts on mt7620 drivers
> >>>>
> >>>> Cheers
> >>>
> >>> Hi Jurgen.
> >>>
> >>> There is a patch which may fix some stuff related with 802.11s, but it
> >>> is not applied automatically. Please, make sure you are using the last
> >>> lime-sdk (execute git pull).
> >>>
> >>> You have to manually execute a script snippet like this:
> >>>
> >>> bash snippets/patch_sdk_mac80211.sh
> >>>
> >>> Then recompile the packages:
> >>>
> >>> ./cooker -b ramips/mt7620
> >>>
> >>> And finally cook the firmware
> >>>
> >>> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
> >>>
> >>> Recently I added a way to enable 11s by default (instead of adhoc) in
> >>> the firmware, you have to use a community profile like this:
> >>>
> >>> ./cooker -c ramips/mt7620 --flavor=lime_default --profile=zbt-ape522ii
> >>> --community=libremesh/11s
> >>>
> >>> ** the communities profiles are listed here:
> >>> https://github.com/libremesh/network-profiles
> >>>
> >>> ** read the README.md of lime-sdk to understand what a community
> profile
> >>> is.
> >>>
> >>> You can also download precompiled binaries with the patch and 11s
> >>> enabled from here:
> >>>
> >>>
> >>>
> http://repo.libremesh.org/lime-17.04/targets/ramips/mt7620/zbt-ape522ii/lime_default/
> >>>
> >>> Please, let us know if it works for you. I don't have this hardware and
> >>> I cannot test by myself.
> >>>
> >>> Cheers.
> >>>
> >>>>
> >>>> Ilario Gelmetti <iochesonome at gmail.com> schrieb am So., 21. Mai 2017
> um
> >>>> 11:42 Uhr:
> >>>>
> >>>>> On 05/20/2017 11:55 PM, Juergen Kimmel wrote:
> >>>>>> Cooking went flawlessly but output has been a vanilla Lede
> firmware.
> >>>>>> Did I overlook something?
> >>>>>
> >>>>> Can you post the cooker command you used?
> >>>>> I tried to replicate using:
> >>>>> ./cooker -c ramips/mt7620 --flavor=lime_default
> --profile=zbt-ape522ii
> >>>>> --update-feeds
> >>>>>
> >>>>> and I got:
> >>>>> ls output/ramips/mt7620/zbt-ape522ii/lime_default/
> >>>>> lede-17.01.1-libremesh-ramips-mt7620-device-zbt-ape522ii.manifest
> >>>>>
> >>>
> lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
> >>>>> sha256sums
> >>>>>
> >>>>> I can't verify if the image works but I can say it contains many
> >>>>> LibreMesh related files, using:
> >>>>> binwalk -e
> >>>>>
> >>>
> lede-17.01.1-libremesh-ramips-mt7620-zbt-ape522ii-squashfs-sysupgrade.bin
> >>>>>
> >>>>> Did you use a different lime-sdk command?
> >>>>> Can you check the firmware image content with binwalk (is there any
> >>>>> other way)?
> >>>>> Bye!
> >>>>> Ilario
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> lime-users mailing list
> >>>>> lime-users at lists.libremesh.org
> >>>>> https://lists.libremesh.org/mailman/listinfo/lime-users
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> lime-users mailing list
> >>>> lime-users at lists.libremesh.org
> >>>> https://lists.libremesh.org/mailman/listinfo/lime-users
> >>>>
> >>>
> >>> --
> >>> ./p4u
> >>>
> >>> _______________________________________________
> >>> lime-users mailing list
> >>> lime-users at lists.libremesh.org
> >>> https://lists.libremesh.org/mailman/listinfo/lime-users
> >>
> >>
> >
> >
> >
> > _______________________________________________
> > lime-users mailing list
> > lime-users at lists.libremesh.org
> > https://lists.libremesh.org/mailman/listinfo/lime-users
> >
>
> --
> ./p4u
>
> _______________________________________________
> lime-users mailing list
> lime-users at lists.libremesh.org
> https://lists.libremesh.org/mailman/listinfo/lime-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.libremesh.org/pipermail/lime-users/attachments/20170524/79911ee9/attachment.html>


More information about the lime-users mailing list